Car Lockout Service Hazelwood Ave, Pittsburgh, PA
See how our car lockout service in Pittsburgh, PA, helped a driver on Hazelwood Ave regain access to their vehicle safely and without damage.
Commercial Locksmith Service Pride St, Pittsburgh, PA
A Pride St business door kept sticking or failing to lock. The latch had drifted out of line with the strike plate, so we cleaned and realigned it, reinforced the panic bar mounting, and tested it.
Residential Locksmith Service Negley Ave, Pittsburgh, PA
The front door on Negley Ave had a loose handle that shifted with every use, though the deadbolt was fine. We removed the worn handle and installed a new lever set with a snug, secure fit.
Ignition Switch Locksmith S Winebiddle St, Pittsburgh, PA
A driver on S Winebiddle St found the key wouldn’t turn and the car was dead. Worn tumblers in the ignition were to blame, so we replaced the cylinder and rekeyed it to match the original key.
Local Locksmith Service Caton St, Pittsburgh, PA
An old attic door on Caton St had a rusted brass deadbolt that barely turned. We worked it free without cracking the wood, cleaned the bore, and installed a Defiant single-cylinder deadbolt.
Commercial Locksmith Service E Main St, Carnegie, PA
An office door on E Main St had a loose lever and a latch that wouldn’t catch. Inside the mortise lock we found a worn spring and misaligned parts, so we fitted a new spring and adjusted the lock.
Panic Bar Repair Liberty Ave, Pittsburgh, PA
The panic bar on a Liberty Ave commercial door was sticking and no longer catching the strike plate. We tightened the mounting hardware and realigned the latch so the door opens easily and locks firmly.
Door Lock Replacement Meyran Ave, Pittsburgh, PA
The front locks on this Meyran Ave rental were aging and sticking. We removed the old brass knob and deadbolt and installed a new Defiant deadbolt set in brushed nickel, then tested it until it turned smoothly.
Commercial Lock Repair Broadway Ave, Pittsburgh, PA
A retail shop’s back door on Broadway Ave stopped latching as the latch and spring slipped out of place. We realigned the latch, tightened the internals, and added lubricant; no new hardware was needed.
Commercial Lock Repair Sarah St, Pittsburgh
A back door on Sarah St had a lever handle lockset that wasn’t latching. The handle was still solid, so we kept it, replaced the faulty internal parts, reinforced old drill patches, and realigned the lock.